Pratt & Whitney designed this engine for continuous operation at high Mach number flight with compressor inlet temperatures above 400 degrees C (750 degrees F). Development began about 1958, and production began in 1964.
The J58 had a single-shaft rotor design, with an 8.8:1 pressure ratio compressor, which incorporated a unique compressor bleed bypass at high Mach number. When opened, bypass valves bled air from the fourth stage, and six ducts routed it around the compressor rear stages, combustor, and turbine. The bleed air re-entered the turbine exhaust around the front of the afterburner where it was used for increased thrust and cooling. The main fuel control scheduled transition to bypass operation as a function of compressor inlet temperature and engine speed. For extreme high-altitude and high-speed environment operation, the engine required special fuel and oil.
Two J58 engines powered each Lockheed A-12 and YF-12 interceptor, and the SR-71 Blackbird reconnaissance and SR-71B trainer aircraft.
This object is on display in Nation of Speed at the National Air and Space Museum in Washington, DC.
Other: 180 x 50in. (457.2 x 127cm)
Overall: 203.2 × 609.6cm (6 ft. 8 in. × 20 ft.)
For more information, visit the Smithsonians Terms of Use.
Stay up to date on the latest stories and events with our newsletter
- About
- Newsroom
- Support
- Get Involved
- Contact
- Host an Event
National Air and Space Museum
6th St. and Independence Ave SW
Washington, DC 20560
202-633-2214
Open daily
10:00 am - 5:30 pm
Steven F. Udvar-Hazy Center
14390 Air and Space Museum Parkway
Chantilly, VA 20151
703-572-4118
Open daily
10:00 am - 5:30 pm